Team Lazy Gecko

Trying to track down information on the transponders and system for the racing series.

Confirmed working for Power Racing series! Link below.
https://www.getfpv.com/i-lap-drone-transponder.html


It would appear homebrew ones have been made from nanos with this code.
https://github.com/RaceFPV/CoreIR

The case file is found here.
https://drive.google.com/file/d/0B2M0p6 ... EWlg4/view

The main system is built from this.
http://www.rclapcounter.com/page1/page1.html

ilap build from hackaday.
https://hackaday.com/tag/ilap/

Transponder self build version.
https://www.getfpv.com/electronics/ilap ... CLEALw_wcB


This is all I could dig up for now.

Some other general information and findings.

The ilap system is composed of a
Encoder: (This USB's into your computer, and outputs eithernet to the bridge sensors.)
Bridge Sensors: Place these every 2 feet. They daisy chain with ethernet cable, and are what pickup the transponders.
Transponder: The official league uses a modified version of the Drone transponder, although the drone one appears to work.
DIY Transponder: Thus far the HackAday copy cats work about half the laps in a given race. More research is required.